Configuration Guide

3.2 On WL-600g Router
Setting Steps:
1. Click Advanced Setup -> NAT -> Virtual Server in the left side menu to open the
configuration page. Click Add to create a new rule.
2. Select the service you want to configure and let the system automatically fill in the
external and internal port number and protocol type. You can also select Custom
Server radio button to designate a certain known server.
3. Fill in external port (range), internal port (range), and protocol for the service if you
select Custom Server radio button. In general, you are recommended to fill the same
port range in external and internal port.
4. Fill the Server IP Address box with the network address of the host or server within
your LAN.
Figure 5
5. Press Save/Apply to save and activate the settings. And you can see the items in the
list:
8