User’s Manual

1-2 Chapter 1: Product introduction
1.3 Monitor introduction
 
1 2 643 1
1. , button:
• Selects a desired preset mode. ( )
• Exits the OSD menu or goes back to the previous menu when the OSD
menu is active. ( )
• Automatically adjusts the image to its optimized position, clock, and phase
by pressing this button for 2-4 seconds (for VGA mode only). ( )
2.
• Decreases values or moves your selection left/down.
• Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function).
( )
3. MENU button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
4.
• Increases values or moves your selection right/up.
• Brightness hotkey
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
 
Blue ON
Amber Standby mode
OFF OFF