User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- TCO certified
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-3ASUS VA27D Series LCD Monitor
5. Shortcut
• Press this button to display the OSD menu when the OSD is off.
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6. Shortcut
• Press this button to display the OSD menu when the OSD is off.
• Default: Blue light lter hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.
1.3.2 Back view
10
10
1 2
3
4
5
6 7 8 9
1 2 3 4 5 6 9
VA27DQSB / VA27DQSB-W
VA27DQ
1. AC-IN port. This port connects the power cord.
2. Line in port. This port connects PC audio source by the audio cable.
3. Earphone jack. This port is only available when an HDMI/DP cable is
connected.
4. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
5. HDMI port. This port is for connection with an HDMI compatible device.
6. VGA port. This 15-pin port is for PC VGA connection.
7. USB 2.0 upstream port. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
8. USB 2.0 downstream ports. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB ash drive, etc.
9. Kensington lock slot.
10. Control buttons.