User's Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
2-4 Chapter 2: Setup
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• VA24DQ: The recommended adjusting angle is +20 to -5˚.
• VA24DQLB: The recommended adjusting angle is +35˚ to -5˚ (for tilt)/+90˚ to
-90˚ (for swiveling)/ +130 mm (for height adjustment)/90˚ (for portrait view).
VA24DQLB
VA24DQ
90° 90°
0°
-5°~+35°
130mm
-5°~+20°
(Tilt)
(Swivel)
(Height adjustment)
Pivoting the monitor (VA24DQLB)
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor to the angle you need.
130mm
-5°~+35°
0°
90°
-90°
0°