Manual

4-4 Chapter 4: BIOS setup
4.1.2 ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS le from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB ash disk that contains the latest BIOS le to the USB port, then launch
EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
• Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and press
<Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS le is found.
• This function supports USB ash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
Flash Info
MODEL: V-P8H67E VER: 0208 DATE: 10/19/2010
Exit
[Enter] Select or Load [Tab] Switch [Up/Down/PageUp/PageDown/Home/End] Move [Esc] Exit [F2] Backup
File Path: fs0:\
Drive Folder Info
fs0:\ 10/19/10 03:21p 4194304 VP8H67E.ROM
ASUSTek EZ Flash 2 BIOS ROM Utility V00.75
File Info
MODEL: VER: DATE
Help Info
2. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.