User guide

4-8 Chapter 4: BIOS setup
Updating the BIOS file
1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
ASUSTek BIOS Updater for DOS V1.07
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
V-P8H61E.ROM 4194304 2010-10-19 17:30:48
PATH: A:\
BOARD: V-P8H61E
VER: 0208
DATE: 10/19/2010
BOARD: Unknown
VER: Unknown
DATE: Unknown
D:\>bupdater /pc /g
2. The BIOS Updater screen appears as below.
3. Press <Tab> to switch between screen elds and use the <Up/Down/Home/End>
keys to select the BIOS le and press <Enter>. BIOS Updater checks the selected
BIOS le and prompts you to conrm BIOS update.
Are you sure to update BIOS?
Yes No
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit
BIOS Updater. Restart your computer.
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the  item under the  menu. Refer to section 
 for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS le if you have
disconnected them.