Instruction Manual

4-12 Chapter 4: BIOS setup
The following item appears only when you installed an Intel
®
CPU that supports
the Enhanced Intel
®
SpeedStep
®
Technology (EIST).
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology.
Setting this item to [Disabled] forces the XD feature ag to always return to zero
(0). Conguration options: [Disabled] [Enabled]
Intel(R)SpeedStep(TM)Tech[Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Conguration options: [Enabled] [Disabled]
4.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the submenu.
NorthBridgeConguration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system. Conguration options: [Disabled] [Enabled]
CongureDRAMTimingbySPD[Enabled]
Allows you to enable or disable conguring the DRAM Timing by SPD.
Conguration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Conguration options: [IGD] [PCI/IGD] [PCI/PEG] [PCG/IGD [PEG/PCI]
CPU TM function [Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are
reduced when the CPU overheats. Conguration options: [Disabled] [Enabled]