Owner manual

2-7ASUS V-Series P5G45

If you purchased a separate CPU heatsink and fan assembly, make sure that

the Thermal Interface Material is properly applied to the CPU heatsink or CPU

before you install the heatsink and fan assembly.

To install the CPU heatsink and fan:

1. Place the heatsink on top of the

installed CPU, making sure that the

four fasteners match the holes on

the motherboard.

3. When the fan and heatsink assembly is in place, connect the CPU fan cable

to the connector on the motherboard.

2. Push down two fasteners at a time in

a diagonal sequence to secure the

heatsink and fan assembly in place.

Do not forget to connect the CPU fan connector! Hardware monitoring errors

can occur if you fail to plug this connector.