Instruction Manual

4-10

Chapter 4: Motherboard info

14. System front panel connector (10-1 pin F_PANEL)

This connector supports several front panel chassis-mounted

functions.

F_PANEL

System panel connector

* Requires an ATX power supply.

PWR Ground

GND Reset

IDE_LED+

IDE_LED-

RESET

IDE LED

PWRSW

PWR_LED-

PWRLED

PWR_LED+

13. Speaker connector (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning

speaker. The speaker allows you to hear system beeps and warnings.

Speaker out connector

SPEAKER

+5V

GND

Speak Out

GND

•

Power/Soft-off button (Black 2-pin PWRSW)

This connector is for the system power button. Pressing the power

button turns the system ON or puts the system in SLEEP or SOFT-OFF

mode depending on the BIOS settings. Pressing the power switch for

more than four seconds while the system is ON turns the system OFF.

• System Power LED connector (2-pin PWRLED)

This 2-pin connector is for the system power LED. The system power

LED lights up when you turn on the system power, and blinks when

the system is in sleep mode.