- ASUSTeK COMPUTER Vintage Desktop PC Operating Manual V2-PE3

ASUS V i n t a g e V 2 - P E 3 5- 2 1
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Resume by USB (S3) [Enabled]
Allows you to wake up the system using a USB mouse or keyboard.
Configuration options: [Disabled] [Enabled]
Resume by Alarm [Disabled]
Allows you to enable or disable RTC to generate an event. When this item
is enabled, you can set the date and time of alarm using the two following
items. Configuration options: [Disabled] [Enabled]
Day of Month Alarm [NA]
To set the day of alarm, highlight this item and press <Enter> to display
a pop-up menu. Key in a value (Min=0, Max=31), then press <Enter>.
Selecting [0] means the alarm will set off everyday.
Time (hh:mm:ss) Alarm [0 : 0 : 0]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu for the
hour field.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press tab to move to the minutes field, then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
5. Press tab to move to the seconds field, then press <Enter>.
6. Key-in a value (Min=0, Max=59), then press <Enter>.
State after Power Failure [Off]
When set to Off, the system goes into off state after an AC power loss.
When set to On, the system turns on after an AC power loss. When set to
Former-Sts, the system goes to its previous state before the AC power
loss. Configuration options: [Off] [On] [Former-Sts]
The following items become configurable only when the Resume by
Alarm item is set to [Enabled].
Resume by Ring [Enabled]
Allows you to enable or disable system power up when the external modem
receives a call while the computer is in soft-off mode.
Configuration options: [Disabled] [Enabled]