User’s Manual
Table Of Contents
- Safety information
- About this guide
- TUF GAMING Z790-PLUS WIFI D4 specifications summary
- Package contents
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS and RAID Support
- Appendix
2-8
Chapter 2: Basic Installation
Chapter 2
3. Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of
different lengths, please refer to the different types and their installation steps below:
• To install an M.2 to M.2_1 and M.2_3 slot
For 2280 and 22110 length
A. (optional) Remove the pre-installed removable M.2 Q-Latch screw at the
2280 length screw hole.
Follow step A only when you wish to install an 22110 length M.2.
B. (optional) Install the bundled M.2 rubber pad if you are installing a single
sided M.2 storage device. DO NOT install the bundled M.2 rubber pads
when installing a double-sided M.2 storage device. The rubber pad
installed by default is compatible with double sided M.2 storage devices.
C. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
D. Install your M.2 to the M.2 slot.
E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL