User Manual
Table Of Contents
- 1 UEFIとは
- 2 UEFI BIOS Utility
- 3 My Favorites
- 4 Main
- 5 Ai Tweaker
- 6 Advanced
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7 Monitor
- 8 Boot
- 9 Tool
- 10 Exit
- 11 UEFI BIOSの更新
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS マニュアル
39
Dual Tau Boost
Dual Tau Boost機能の有効/無効を設定します。この機能はデスクトップCPUのTDP
35W/65W/12W SKUでのみ適用されます。Intel® Dynamic Platform and Thermal
Framework (DPTF) が有効な場合、この機能は無視されます。
設定オプション: [Disabled] [Enabled]
IA AC Load Line
mOhms で定義された交流ロードラインを設定します。
設定オプション: [Auto] [0.01] - [62.49]
IA DC Load Line
mOhms で定義された直流ロードラインを設定します。
設定オプション: [Auto] [0.01] - [62.49]
IA CEP Enable
IA CEP (Current Excursion Protection) サポートの有効/無効を設定します。Pcode
Mailbox Command 0x37、Sub-command 0x1 を使用し、Databit2を1に設定します。
設定オプション: [Auto] [Disabled] [Enabled]
GT CEP Enable
GT CEP (Current Excursion Protection) サポートの有効/無効を設定します。Pcode
Mailbox Command 0x37、Sub-command 0x1 を使用し、Databit3を1に設定します。
設定オプション: [Auto] [Disabled] [Enabled]
SA CEP Enable
SA CEP (Current Excursion Protection) サポートの有効/無効を設定することができま
す。Pcode Mailbox Command 0x37、Sub-command 0x1 を使用し、Databit3を1に設定
しま す。
設定オプション: [Auto] [Disabled] [Enabled]
IA SoC Iccmax Reactive Protector
設定オプション: [Auto] [Disabled] [Enabled]
Inverse Temperature Dependency Throttle
設定オプション: [Auto] [Disabled] [Enabled]
IA VR Voltage Limit [Auto]
Voltage Limit (VMAX)。この値は任意の時点で許容される最大瞬時電圧を表します。
BIOS VR mailbox command 0x8 を使用します。
設定オプション: [Auto] [0] - [7999]
CPU DLVR Bypass mode support
設定オプション: [Auto] [Disabled] [Enabled]
Thermal Velocity Boost
TVB Voltage Optimizations
Intel® Thermal Velocity Boost (TVB) 機能を搭載したプロセッサーサーマルベースの電圧
最適化機能の有効/無効を設定します。Overclocking Mailboxコマンド0x18/0x19を使用
しま す。
設定オプション: [Auto] [Disabled] [Enabled]