User Manual

PRIME/PRO/ProArt/TUF GAMING Intel 400 Series BIOS Manual
17
The following item appears only when Ai Overclock Tuner is set to [XMP I] or [XMP II].
XMP
This item allows you to select your eXtreme Memory Profile (XMP). Each profile has
its own DRAM frequency, timing and voltage.
The following items appear only when Ai Overclock Tuner is set to [XMP I], [XMP II], or
[Manual].
BCLK Frequency
This item allows you to set the BCLK (base clock) frequency to enhance the system
performance. Use the <+> or <-> to adjust the value.
We recommend you to set the value based on the CPU specification, as high BCLK
frequencies may damage the CPU permanently.
BCLK Spread Spectrum
This item allows you to enable or disable the BCLK Spread Spectrum. When set to
[Enabled] the peak value of EMI emissions is reduced. Set to [Disabled] for a more
accurate Base Clock.
Configuration options: [Auto] [Disabled] [Enabled]
ASUS MultiCore Enhancement
[Auto - Lets BIOS Optimize] This item allows you to use ASUS optimized core ratio
Turbo settings at default processor speeds.
[Disabled - Enforce All limits] This item allows you to use Intel default Turbo core ratio
settings.
[Enabled - Remove All limits] This item allows you to use optimized power and current
thresholds for maintaining maximum performance.
SVID Behavior
This item allows you to program the CPU’s SVID behavior based on the CPU’s quality.
Configuration options: [Auto] [Best-Case Scenario] [Typical Scenario] [Worst-Case Scenario]
[Intel’s Fail Safe] [Trained]
CPU Core Ratio
This item allows you to set the CPU core ratios.
Configuration options: [Auto] [Sync All Cores] [Per Core] [AI Optimized]
The [AI Optimized] item appears only when you use an unlocked CPU.
The following item appears only when CPU Core Ratio is set to [Sync All Cores] or [Per
Core].
1-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the
2-Core Ratio Limit.