User Manual
Table Of Contents
- 1 认识 BIOS 程序
- 2 BIOS 设置程序
- 3 Q-Fan 控制
- 4 收藏夹菜单(My Favorites)
- 5 主菜单(Main)
- 6 Ai Tweaker 菜单(Ai Tweaker)
- 7 高级菜单(Advanced)
- 7.1 平台各项设置(Platform Misc Configuration)
- 7.2 处理器设置(CPU Configuration)
- 7.3 系统代理设置(System Agent Configuration)
- 7.4 PCH 设置(PCH Configuration)
- 7.5 PCH 存储设备设置(PCH Storage Configuration)
- 7.6 PCH-FW 设置(PCH-FW Configuration)
- 7.7 ThunderboltTM 设置(Thunderbolt(TM) Configuration)
- 7.8 PCI 子系统设置(PCI Subsystem Setting)
- 7.9 USB 设备设置(USB Configuration)
- 7.10 网络堆栈设置(Network Stack Configuration)
- 7.11 NVMe 设置(NVMe Configuration)
- 7.12 内置设备设置(Onboard Devices Configuration)
- 7.13 高级电源管理设置(APM Configuration)
- 7.14 硬盘/固态硬盘 SMART 信息(HDD/SSD SMART Information)
- 8 监控菜单(Monitor)
- 9 启动菜单(Boot)
- 10 工具菜单(Tool)
- 11 退出 BIOS 程序(Exit)
- 12 更新 BIOS 程序
PRIME / TUF GAMING Intel
®
500 系列 BIOS 用戶手冊
17
DRAM WRITE Recovery Time
設置值有:[Auto] [1] – [31]
DRAM READ to PRE Time
設置值有:[Auto] [1] – [15]
DRAM FOUR ACT WIN Time
設置值有:[Auto] [1] – [63]
DRAM WRITE to READ Delay / DRAM WRITE to READ Delay L /
DRAM WRITE to READ Delay S
設置值有:[Auto] [1] – [15]
DRAM CKE Minimum Pulse Width
設置值有:[Auto] [0] – [15]
DRAM Write Latency
設置值有:[Auto] [1] – [31]
Skew Control
ODT RTT WR (CHA) / ODT RTT WR (CHB)
設置值有:[Auto] [0 DRAM Clock] [80 DRAM Clock] [120 DRAM Clock]
[240 DRAM Clock] [255 DRAM Clock]
ODT RTT PARK (CHA) / ODT RTT NOM (CHA) / ODT RTT PARK (CHB)
/ ODT RTT NOM (CHB)
設置值有:[Auto] [0 DRAM Clock] [34 DRAM Clock] [40 DRAM Clock]
[48 DRAM Clock] [60 DRAM Clock] [80 DRAM Clock] [120 DRAM Clock]
[240 DRAM Clock]
ODT_READ_DURATION / ODT_READ_DELAY / ODT_WRITE_DURATION
/ ODT_WRITE_DELAY
設置值有:[Auto] [0] – [7]
Data Rising Slope / Cmd Rising Slope / Ctl Rising Slope / Clk Rising Slope /
Data Falling Slope / Cmd Falling Slope / Ctl Falling Slope / Clk Falling Slope
設置值有:[Auto] [0] – [15]
Data Rising Slope Offset / Cmd Rising Slope Offset /
Ctl Rising Slope Offset / Clk Rising Slope Offset /
Data Falling Slope Offset / Cmd Falling Slope Offset /
Ctl Falling Slope Offset / Clk Falling Slope Offset
設置值有:[Auto] [0] [1]
RTL IOL Control
DRAM RTL INIT value
設置值有:[Auto] [0] – [127]
DRAM IOL INIT value(CHA) / DRAM IOL INIT value(CHB)
設置值有:[Auto] [0] – [15]