User’s Manual

10
安全性須知
這個畫叉的帶輪子的箱子表示這個產品(電子設備)不能直接放入垃圾筒。請根据不同地
方的規定處理。
請勿將含汞電池丟棄於一般垃圾筒。此畫叉的帶輪子的箱子表示電池不能放入一般垃圾筒。
華碩 REACH
注意:請遵守REACH(Registration,Evaluation,Authorisation,and Restriction of Chemicals)
管理規範,我們會將產品中的化學物質公告在華碩 REACH 網站,詳細請參考 http://csr.asus.com/
english/REACH.htm。
操作方面的安全性
• 您安裝主板以及加入硬件設備之前請務必詳加閱讀本手冊所提供的相關信
• 在使用產品之前請確定所有的數據線電源線都已正確地連接好若您發現有任何重大的瑕疵
儘快聯絡您的經銷商
• 為避免發氣短路情形請務必將所有沒用到的螺絲回形針及其他零件收好不要遺留在主板上
中。
• 灰塵濕氣以及劇烈的溫度變化都會影響主板的使用壽命因此請盡避免放置在這些地方
• 請勿將電腦主放置在容易搖晃的地方
• 若在本產品的使用上有任何的技術性問題請和經過檢定或有經驗的技術人員聯絡
FCC Compliance Information
Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must
be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.