User Manual
Table Of Contents
- 1 UEFIとは
- 2 UEFI BIOS Utility
- 3 My Favorites
- 4 Main
- 5 Ai Tweaker
- 6 Advanced
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7 Monitor
- 8 Boot
- 9 Tool
- 10 Exit
- 11 UEFI BIOSの更新
38
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS マニュアル
SA CEP Enable
SA CEP (Current Excursion Protection) サポートの有効/無効を設定することができま
す。Pcode Mailbox Command 0x37、Sub-command 0x1 を使用し、Databit3を1に設定
します。
設定オプション: [Auto] [Disabled] [Enabled]
IA SoC Iccmax Reactive Protector
設定オプション: [Auto] [Disabled] [Enabled]
Inverse Temperature Dependency Throttle
設定オプション: [Auto] [Disabled] [Enabled]
IA VR Voltage Limit
Voltage Limit (VMAX)。この値は任意の時点で許容される最大瞬時電圧を表します。BIOS
VR mailbox command 0x8 を使用します。
設定オプション: [Auto] [0] - [7999]
Thermal Velocity Boost
TVB Voltage Optimizations
Intel® Thermal Velocity Boost (TVB) 機能を搭載したプロセッサーサーマルベースの電圧
最適化機能の有効/無効を設定します。Overclocking Mailboxコマンド0x18/0x19を使用
します。
設定オプション: [Auto] [Disabled] [Enabled]
V-Max Stress
[Enabled] に設定すると、シリコンの最大電圧が高すぎる場合に周波数がクリップするこ
とがあります。[Disabled] の場合、周波数はクリップされません。
設定オプション: [Auto] [Disabled] [Enabled]
Overclocking TVB
温度と周波数の依存関係を描画できるようにする機能の有効/無効を設定します。
設定オプション: [Auto] [Disabled] [Enabled] [+1Boost Prole] [+2Boost Prole]
+1Boost Prole(K CPU):
自動最適化温度制御により、1ビンの追加ブーストを可能にします。
+2Boost Prole(K CPU):
自動最適化温度制御により、2ビンの追加ブーストを可能にします。
次の項目は「Overclocking TVB」を [Enabled] に設定した場合にのみ表示されます。
1-Core Active / 2-Core Active / 3-Core Active / 4-Core Active / 5-Core Active / 6-Core
Active
設定オプション: [Auto] [Enabled]