User Manual

44
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
DRAM ODT impedance DQS_RTT_PARK
Specifies the DRAM ODT impedance DQS_RTT_PARK.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
Processor ODT impedance
Specifies the Processor ODT impedance.
Configuration options: [Auto] [High Impedance] [480 ohm] [240 ohm] [160 ohm]
[120 ohm] [96 ohm] [80 ohm] [68 ohm] [60 ohm]
Processor DQ drive strengths
Specifies the Processor DQ drive strengths.
Configuration options: [Auto] [High Impedance] [480 ohm] [25.3 ohm]
DRAM DQ drive strengths
Specifies the DRAM DQ drive strengths.
Configuration options: [Auto] [48 ohm] [40 ohm] [34 ohm]
DDR Controller Configuration
This item allows you to configure DDR controller configuration.
DDR Power Options
Power Down Enable
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled] [Auto]
DDR RAS
This item allows you to configure DDR RAS.
Disable Memory Error Injection
Configuration options: [False] [True] [Auto]
DDR ECC Configuration
DDR Security
This item allows you to configure DDR Security.
TSME
Configuration options: [Auto] [Enabled] [Disabled]
Data Scramble
Configuration options: [Enabled] [Disabled] [Auto]
DDR Addressing Options
This item allows you to configure DDR Addressing Options.
Chipselect Interleaving
Interleave memory blocks across the DRAM chip selects for node 0.
Configuration options: [Disabled] [Auto]
Address Hash Bank
Allows you to enable or disable bank address hashing.
Configuration options: [Disabled] [Enabled] [Auto]
Address Hash CS
Enable or disable CS address hashing.
Configuration options: [Auto] [Enabled] [Disabled]
BankSwapMode
Configuration options: [Auto] [Disabled] [Swap APU]
DDR Training Options
This item allows you to configure DDR Training Options.
DFE Read Training
Perform 2D Read Training with DFE on.
Configuration options: [Auto] [Enable] [Disable]