User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
40
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
The following item appears only when Trfc1 Ctrl is set to [Manual].
Trfc1
Specifies the Refresh Recovery Delay Time (tRFC1). Valid values:
0x32 ~ 0xFFF. The value is in hex.
Trfc2 Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trfc2 Ctrl is set to [Manual].
Trfc2
Specifies the Refresh Recovery Delay Time (tRFC2). Valid values:
0x32 ~ 0xFFF. The value is in hex.
TrfcSb Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrfcSb Ctrl is set to [Manual].
TrfcSb
Specifies the Refresh Recovery Delay Time (tRFCSB). Valid values:
0x32 ~ 0x7FF. The value is in hex.
DDR Non-SPD Timing
Trtp Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trtp Ctrl is set to [Manual].
Trtp
Specifies the Read CAS# to Precharge command delay time. Valid
values: 0x5 ~ 0x1F. The value is in hex.
TrrdL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrrdL Ctrl is set to [Manual].
TrrdL
Specifies the Activate to Activate Delay Time, same bank group
(tRRD_L). Valid values: 0x4 ~ 0x20. The value is in hex.
TrrdS Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.