User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
36
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
Local APIC MOde
Allows you to select local APIC operation modes.
Configuration options: [Compatibility] [xAPIC] [x2APIC] [Auto]
ACPI _CST C1 Declaration
Determines whether or not to declare the C1 state to the OS.
Configuration options: [Disabled] [Enabled] [Auto]
MCA
error thresh enable
Allows you to enable MCA error thresholding.
Configuration options: [False] [True] [Auto]
The following item appears only when MCA error thresh enable is set to [True].
MCA error thresh count
Effective error threshold count = 4095(0xFFF) - <this value> (e.g. the default value of
0xFF5 results in a threshold of 10)
Configuration options: [1] - [4095]
SMU and PSP Debug Mode
When this item is set to
[Enabled], uncorrected errors detected by the PSP FW or
SMU FW that should cause a cold reset, will hang and not restart the system.
Configuration options: [Disabled] [Enabled] [Auto]
PPIN Opt-in
Allows you to turn on PPIN feature.
Configuration options: [Disabled] [Enabled] [Auto]
Fast Short REP MOVSB
This item is set to 1 by default, but can be set to zero for analysis purposes as long as
OS supports it.
Configuration options: [Disabled] [Enabled]
Enhanced REP MOVSB/STOSB
This item is set to 1 by default, but can be set to zero for analysis purposes as long as
OS supports it.
Configuration options: [Disabled] [Enabled]
REP-MOV/STOS Streaming
Allow REP-MOV/STOS to use non-caching streaming store for large sizes.
Configuration options: [Disabled] [Enabled]
Power Supply Idle Control
Configuration options: [Low Current Idle] [Typical Current Idle] [Auto]
Xtrig7 Workaround
This workaround is only applicable for Rev A. For Rev A, by default (Auto), the
Bronze workaround is applied. For Rev B, no workaround is applied and changing the
selection for this option will not result in any changes.
[Auto]
Bronze workaround is applied.
[No Workaround] No workaround is applied.
[Bronze Workaround] DbReq and PDM function as expected, breakpoint redirect
capability compromised.
[Silver Workaround] DbReq, PDM, and breakpoint redirect function as expected,
SCAN capability compromised.