User Manual
Table Of Contents
- 1 UEFIとは
- 2 UEFI BIOS Utility
- 3 My Favorites
- 4 Main
- 5 Ai Tweaker
- 6 Advanced
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7 Monitor
- 8 Boot
- 9 Tool
- 10 Exit
- 11 UEFI BIOSの更新
PRIME / ProArt / TUF GAMING AMD 600 Series BIOSガイド
35
L2 Stream HW Prefetcher
L 2 ストリーム ハードウェアプリフェッチャー の 有 効/ 無 効を設 定します。
設定オプション: [Disable] [Enable] [Auto]
L1 Stride Prefetcher
個々の命 令 のメモリーアクセス履 歴を 使 用し 、各アクセス が 前と一定の距離にある 場 合 に 追
加 の 行をフェッチする機 能 の 有 効 / 無 効 を 設 定します。
設定オプション: [Disable] [Enable] [Auto]
L1 Region Prefetcher
ある命 令 のデータアクセスの後に他 のデータアクセスが続く傾 向がある場 合、メモリーアクセ
ス履歴を使用して追加の行をフェッチする機能の有効/無効を設定します。
設定オプション: [Disable] [Enable] [Auto]
L2 Up/Down Prefetcher
メモリーアクセス履歴を使用して、すべてのメモリーアクセスに対して次の行または前の行をフ
ェッチするかどうかを決定する機能の有効/無効を設定します。
設定オプション: [Disable] [Enable] [Auto]
Core Watchdog
Core Watchdog Timer Enable
C P Uウォッチドッグタイマー の 有 効/ 無 効を設 定します。
設定オプション: [Disabled] [Enabled] [Auto]
次 の 項 目 は「 Core Watchdog Timer Enable」を [Enabled] に設定した場合にのみ表示され
ます。
Core Watchdog Timer Interval
CPUウォッチドッグタイマーの間隔を設定します。
設定オプション: [Auto] [39.68us] [80.64us] [162.56us] [326.4us] [654.08us] [1.309ms]
[2.620ms] [5.241ms] [10.484ms] [20.970ms] [40.64ms] [82.53ms] [166.37ms] [334.05ms]
[669.41ms] [1.340s] [2.681s] [5.364s] [10.730s] [21.461s]
Core Watchdog Timer Severity
CPUウォッチドッグタイマーの重大度を設定します。
設定オプション: [No Error] [Transparent] [Corrected] [Deferred] [Uncorrected] [Fatal]
[Auto]
Platform First Error Handling
Platform First Error Handling (PFEH) の有効/無効を設定します。
設定オプション: [Enabled] [Disabled] [Auto]
Opcache Control
Opcacheの有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]
Streaming Stores Control
Streaming Stores機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]
Local APIC Mode
ローカルAPICの動作モードを設定します。
設定オプション: [Compatibility] [xAPIC] [x2APIC] [Auto]
ACPI _CST C1 Declaration
C1ステートをOSに宣言する機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]