User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
45
8.2 Fan Speed Monitor
CPU Fan Speed / CPU Optional Fan Speed / Chassis Fan 1(~3) Speed / AIO
PUMP Speed [xxxx RPM]
The onboard hardware monitor automatically detects and displays the CPU fan, CPU optional
fan, chassis fan 1~3, and AIO pump fan speeds in rotations per minute (RPM). If the fan is
not connected to the motherboard, the eld shows [N/A]. Select [Ignore] if you do not wish to
display the detected speed.
8.3 Voltage Monitor
CPU Core Voltage / 12V Voltage / 5V Voltage / 3.3V Voltage / DRAM Voltage /
CPU VCCIO Voltage / PCH VCCIO 1.8V [xx.xxx V]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not wish to display the detected voltage output.