User Manual
Table Of Contents
- MyStorage® ManagementSoftware
- Chapter1 MyStorage Management Software Overview
- Chapter2 MyStorage Management Software Installation
- Chapter3 Getting Started withMyStorage Management Software
- Chapter4 Operating Fibre Channel MyStorage Management Software
- Chapter5 Operating SAS/SATA MyStorage Management Software
- 5.1 Storage Topology: LSI SAS/SATA Adapters
- 5.2 Storage Topology: LSI SAS/SATA Expanders
- 5.3 Typical SAS/SATA Topologies
- 5.4 Storage Topology: Storage Devices
- 5.5 RAID Topology: LSI SAS/SATA Adapters
- 5.6 RAID Topology: Storage Devices
- 5.7 Event Logs
- 5.8 Backup/Restore/Update Adapter Firmware
- 5.9 Launch Web Browser
- AppendixA Enable Boot Option for Fibre Channel HBAs
- Customer Feedback
Storage Topology: LSI Fibre Channel Adapters 4-5
Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
Figure 4.4 Advanced FC Port Information Tab
The fifth tab, labeled Advanced Configuration, provides an opportunity to
adjust default settings of the LSI host adapter (as Figure 4.5 shows). The
settings are described in the following sections.