User's Manual

ASUS TS300-E8-RS4-C
5-27
5.4.16 APM
Allows you to congure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
Allows you to set the state the system will go to after an AC power loss. Conguration options:
[Power Off] [Power On] [Last State]
Power On By PCI [Disabled]
You can use this option to enable or disable the Wake-on-LAN feature of the Intel
®
LAN.
Conguration options: [Disabled] [Enabled]
Power On By PCIE [Disabled]
This allows you to enable or diasble the PCIE devices to generate a wake event. Conguration
options: [Disabled] [Enabled]
Power On By RTC [Disabled]
This item allows you to enable or disable RTC to generate a wake event. When set to [Enabled],
the items RTC Alarm Date (Days) and Hour/Minute/Second becomes user-congurable where
you can set values.
EUP Ready [Disabled]
This item allows you to switch off some power at S5 to get the system ready for EuP requirement.
Conguration options: [Enabled] [Disabled]
5.4.15 Runtime Error Logging Support
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Runtime Error Logging Support [Disabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Restore AC Power Loss [Last State]
Power On By PCI [Disabled]
Power On By PCIE [Disabled]
Power On By RTC [Disabled]
EuP Ready [Disabled]
Specify what state
to go to when power
is re-applied after
a power failure (G3
state).
Runtime Error Logging Support [Disabled]
Allows you to enable or disable the Runtime Error Logging Support. Conguration options:
[Disabled] [Enabled]
Enable/Disable
Runtime Error Logging
Support.