User Guide

ASUS TS300-E3ASUS TS300-E3

ASUS TS300-E3

1-91-9

1-9

1.6 LED information

The barebone system comes with five LED indicators. Refer to the following

table for the LED status description.

System and HDD LEDSystem and HDD LED

System and HDD LED

*SCSI Access Fault-Tolerant Enclosure (on PS4 model only)

Power LED (blue)Power LED (blue)

Power LED (blue)

HDD Access LED (green)HDD Access LED (green)

HDD Access LED (green)

Message LED (red)Message LED (red)

Message LED (red)

Drive Status LED (green/red)Drive Status LED (green/red)

Drive Status LED (green/red)

Drive Activity LED (green)Drive Activity LED (green)

Drive Activity LED (green)

LEDLED

LED

IconIcon

Icon

Display statusDisplay status

Display status

DescriptionDescription

Description

SystemSystem

System

Power LED ON System power ON

Blinking System is in suspend mode

HDD Access LED OFF No activity

Blinking Read/write data into the HDD

Message LED OFF System is normal; no incoming event

Blinking ASMS indicates a HW monitor event

Hard disk drivesHard disk drives

Hard disk drives

Drive Status LED Green Bridge board connected to backplane

Installed HDD is in good condition

Red HDD failure

Green/Red - Blinking HDD rebuilding using the RAID card

SAF-TE* function

Drive Activity LED Blinking Read/write data into the HDD

The Power, HDD Access, and Message LEDs are visible even if the

system front bezel is closed.