User Guide

ASUS TS100-E6/PI4 5-3
5.1.3 RAID controller selection
You can choose either the LSI Software RAID Conguration Utility or the Intel
Matrix Storage Manager as the default utility to create RAID set(s). See
5. Intel
®
3420 SATA port S/W RAID setting
on page 3-6 for details.
5.1.4 Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s)
using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Main
menu >
StorageConguration
, and then press <Enter>.
3. Set the
CongureSATAas
item to [RAID].
4. Save your changes, and then exit the BIOS Setup.
Refer to Chapter 4 for details on entering and navigating through the BIOS
Setup.