Technical information

48
Netfinity 5100 Power, Monitor & Accessories
Part Number Description Part Number Description
Power
1
Conversion Kits
33L3760 Netfinity 250 W Hot-Swap Redundant Power Supply
2
37L6858 Netfinity 5Ux24D Tower-to-Rack Kit
37L6881 Netfinity Hot-Swap Power Supply Expansion Kit
3
Uninterruptable Power Supply (UPS)
4
Rack and NetBAY
1
94G3135 APC Smart-UPS 1000 930842P Netfinity Enterprise Rack
94G3136 APC Smart-UPS 1400 930842X Netfinity Enterprise Expansion Cabinet
94G6674 APC Smart-UPS 1400RMB
5
9306900 Netfinity Rack
94G6676 APC Smart-UPS 3000RMB
5
9306200 Netfinity NetBAY22
37L6861 APC Smart-UPS 5000RMB
6
Keyboard and Mouse
2
Monitors
7
28L3644 Space Saver II Keyboard
3, 5
6331B2N
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
8
01K1260 TrackPoint IV 104-Key Black Keyboard
4, 5
6332J1N
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image
Size), stealth black
8
28L3621 Preferred Keyboard (stealth black)
4
654841N
G76 Color Monitor 17” (406-mm, 16” Viewable Image
Size), stealth black
8
28L3673 Sleek 2-Button Stealth Black Mouse
65494AN
G96 Color Monitor 19” (454-mm, 17.9” Viewable Image
Size), stealth black
10
1. Netfinity 5100 rack models are housed in a 19” rack mountable drawer and require one of the
racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported
devices.
2. Tower models include both a keyboard and mouse. Rack models include neither.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use”
position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share
a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
9513AG1
T55A Flat Panel Color Monitor (381-mm, 15” Viewable
Image Size)
8
, stealth black
9
9519AG1
T85A Flat Panel Color Monitor (459-mm, 18.1”
Viewable Image Size), stealth black
10
1. Netfinity 5100 systems include a single 250 W, hot-swap power supply and a single
9 ft. 110 V power cord with an IEC 320-C13 connector on the system end and NEMA 5-
15P on the other end. Power supply redundancy may be achieved with the addition of
optional Netfinity 250 W Hot-Swap Redundant Supply (P/N 33L3760). Netfinity Hot-
Swap Power Supply Expansion Kit (P/N 37L6881) is required when optional power
supplies are to be added. Redundancy for configurations of greater than 250 W
requires installation of a second optional supply. Whenever devices are installed in
bays A or B, both the expansion kit and a second power supply are required.
Generally, configurations containing greater than six PCI adapters and HDDs, in any
combination, will require the second power supply. To assist in determining when an
additional power supply is required to preserve redundancy, a “Non-Redundant LED”
is a standard feature of the Netfinity 5100.
2. Netfinity 250 W Hot-Swap Redundant Power Supply (P/N 33L3760) includes a
single 6 ft.power cord for connection to a low voltage wall outlet. Netfinity Hot-Swap
Power Supply Expansion Kit (P/N 37L6881) must be installed prior to adding optional
power supplies.
3. Netfinity Hot-Swap Power Supply Expansion Kit (P/N 37L6881) includes a hot-swap
power backplane, terminated two-drop LVD SCSI cable, and mounting brackets for
DLT tape drives. Required when installing a second power supply or devices in the
133-mm (5.25”) HH bays.
4. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
5. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
6. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
7. Netfinity 5100 uses an SVGA controller (S3 Savage4 chipset) with 8 MB of video
memory.
8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
9. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit
(P/N 37L6857) and Netfinity Rack Keyboard Tray (P/N 28L4707). A space saver
keyboard may coexist within the same 28L4707 keyboard tray.
10. Not supported for installation in a 19” rack.