Manual

ManualsBrandsAsus ManualsComputersTerminator A7VT400

ASUS Terminator 1 A7VT400ASUS Terminator 1 A7VT400

ASUS Terminator 1 A7VT400

5-95-9

5-9

5.2.15.2.1

5.2.1

BIOS menu barBIOS menu bar

BIOS menu bar

The top of the screen has a menu bar with the following selections:

MAINMAIN

MAIN Use this menu to make changes to the basic system

configuration.

ADVANCEDADVANCED

ADVANCED Use this menu to enable and make changes to the

advanced features.

POWERPOWER

POWER Use this menu to configure and enable Power

Management features.

BOOTBOOT

BOOT Use this menu to configure the default system device

used to locate and load the Operating System.

EXITEXIT

EXIT Use this menu to exit the current menu or to exit the

Setup program.

To access the menu bar items, press the right or left arrow key on the

keyboard until the desired item is highlighted.

5.2.25.2.2

5.2.2

Legend barLegend bar

Legend bar

At the bottom of the Setup screen is a legend bar. The keys in the legend

bar allow you to navigate through the various setup menus. The following

table lists the keys found in the legend bar with their corresponding

functions.

Navigation Key(s)Navigation Key(s)

Navigation Key(s)

Function DescriptionFunction Description

Function Description

<F1> or <Alt + H> Displays the General Help screen from anywhere in the

BIOS Setup

<Esc> Jumps to the Exit menu or returns to the main menu

from a sub-menu

Left or Right arrowLeft or Right arrow

Left or Right arrow Selects the menu item to the left or right

Up or Down arrowUp or Down arrow

Up or Down arrow Moves the highlight up or down between fields

- (minus key)- (minus key)

- (minus key) Scrolls backward through the values for the highlighted

field

+ (plus key) or spacebar+ (plus key) or spacebar

+ (plus key) or spacebar Scrolls forward through the values for the

highlighted field

<Enter> Brings up a selection menu for the highlighted field

<Home> or <PgUp> Moves the cursor to the first field

<End> or <PgDn> Moves the cursor to the last field

<F5> Resets the current screen to its Setup Defaults

<F10> Saves changes and exits Setup