User Manual

2-42-4

2-4

Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installation

7. Disconnect the power plugs on

the motherboard, then set the

PSU aside.

4. Slide the PSU as the zoomed

image shows, until the side hook

is disengaged from the chassis.

5. Push the PSU towards the front

panel for about half an inch.

6. Slightly lift the PSU.

2.4 Removing the power supply unit

You must remove the power supply unit (PSU) before you can install a

central processing unit( CPU) and other system components.

To remove the PSU:

1. Lay the system on its side on a

flat, stable surface.

2. Disconnect the optical drive and

floppy disk drive power plugs.

3. Remove the screw that secures

the PSU to the chassis.

When removing the PSU,

make sure to hold or support

it firmly. The unit may

accidentally drop and damage

other system components.