Manual

113
Chapter 10 - Conguring VPN
ASUS SL1200
10.3.2 Modify VPN Rules
To modify a VPN rule
1. Log into Configuration Manager as administrator. Click
VPN -> VPN
Tunnel
.
2. Prior to modifying a VPN rule, make sure that the VPN service is
enabled in System Service Conguration page.
3. Select the rule number from the
ID
drop-down list or click on the icon of
the rule to be modied in the VPN Connection Status table.
4. Click on
Enable
or
Disable
radio button to enable or disable this rule.
5. Make changes to any or all of the following elds: local/remote secure
group, remote gateway, key management type (select Preshared
Key), pre-shared key for IKE, encryption/authentication algorithm for
IKE, lifetime for IKE, encryption/authentication algorithm for IPSec,
operation mode for IPSec, PFS group for IPSec and lifetime for IPSec.
Please see Table 10.4 for explanation of these elds.
6. Click on <
Modify
> to modify this VPN rule. The new settings for this
VPN rule will then be displayed in the VPN Connection Status table at
the bottom half of the VPN Conguration page.
10.3.3 Delete VPN Rules
To delete an outbound ACL rule
1. Log into Configuration Manager as administrator. Click
VPN -> VPN
Tunnel
.
2. Prior to deleting a VPN rule, make sure that the VPN service is enabled
in System Service Conguration page.
3. Select the rule number from the
ID
drop-down list or click on the icon
of the rule to be modied in the VPN Connection Status table.
4. Click on <
Delete
> to delete this VPN rule. The VPN rule deleted will be
removed from the VPN Connection Status table located at the bottom half
of the same conguration page.