User's Manual

1-32
Chapter 1: Product introduction
Chapter 1
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown)
rst,andtheninstalltheQ-Connector(USB)totheUSBconnectoronboardifyourchassis
supports front panel USB ports.
The USB 2.0 module is purchased separately.
4. USB 2.0 connectors (10-1 pin USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis.TheseUSBconnectorscomplywithUSB2.0specicationthatsupportsupto
48 MBps connection speed.