User guide

ManualsBrandsAsus ManualsComputer equipmentS1-P111

4-324-32

4-32

Chapter 4: BIOS informationChapter 4: BIOS information

Chapter 4: BIOS information

4.6.44.6.4

4.6.4

SecuritySecurity

Security

The Security menu items allow you to change the system security settings.

Select an item then press <Enter> to display the configuration options.

Security Settings

Supervisor Password Not Installed

User Password Not Installed

Change Supervisor Password

Boot Sector Virus Protection [Disabled]

<Enter> to change

password.

<Enter> again to

disable password.

Change Supervisor PasswordChange Supervisor Password

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor

Password item on top of the screen shows the default

Not InstalledNot Installed

Not Installed.

After you have set a password, this item shows

InstalledInstalled

Installed.

To set a

Supervisor PasswordSupervisor Password

Supervisor Password:

1. Select the Change Supervisor Password item and press <Enter>.

2. On the password box that appears, type a password composed of

letters and/or numbers, then press Enter. Your password should have

at least six characters.

3. Confirm the password when prompted.

The message “Password Installed” appears after you have successfully set

your password.

The Supervisor Password item now shows

InstalledInstalled

Installed.

To change the supervisor password, follow the same steps as in setting a

user password.

To clear the supervisor password, select the Change Supervisor Password

then press <Enter>. The message “Password Uninstalled” appears.

If you forget your BIOS password, you can clear clear it by erasing the

CMOS Real Time Clock (RTC) RAM. Refer to section “3.3 Jumper” for

instructions on erasing the RTC RAM.