User's Manual

4.6.2 System

The System page allows you to congure your wireless router

settings.

To set up the System settings:

1. From the navigation panel, go to Advanced Settings >

Administration > System tab.

2. You can congure the following settings:

• Change router login password: You can change the

password and login name for the wireless router by entering

a new name and password.

• WPS button behavior: The physical WPS button on the

wireless router can be used to activate WPS or switch o

wireless networking.

• Time Zone: Select the time zone for your network.

• NTP Server: The wireless router can access a NTP (Network

time Protocol) server in order to synchronize the time.

• Enable Telnet: Click Yes to enable Telnet services on the

network. Click No to disable Telnet.

• Authentication Method: You can select HTTP, HTTPS, or

both protocols to secure router access.

• Enable Web Access from WAN: Select Yes to allow devices

outside the network to access the wireless router GUI

settings. Select No to prevent access.

• Only allow specic IP: Click Yes if you want to specify the IP

addresses of devices that are allowed access to the wireless

router GUI settings from WAN.

• Client List: Enter the WAN IP addresses of networking

devices allowed to access the wireless router settings. This

list will be used if you clicked Yes in the Only allow specic

IP item.

3. Click Apply.