User Guide

2-3
RS720Q-E8-RS12
2.2 Air Duct
The RS720Q-E8-RS12 server system comes with a motherboard fan air duct to enable better
air ow inside the motherboard while the system is running.
Removing the air duct
1. Remove the screws securing the air duct
in place
2. Carefully lift the air duct out of the
chassis.
Installing the air duct
1. Position the air duct on top of the
motherboard then carefully t it on top of
the motherboard. Refer to the following
illustration for the right orientation of the
air duct.
2. Reinstall the screws to secure the air
duct in place. A torque value of 2Kgf-cm
is recommended.
Ensure that the air duct is rmly tted
to the motherboard.
Insert the air duct on the gaps
between the memory slots.