User Manual
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Getting Started
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Captured BSOD
- 3.7.2 Date & Time
- 3.7.3 External User Services
- 3.7.4 KVM Mouse Setting
- 3.7.5 Log Settings
- 3.7.6 Manage Licenses
- 3.7.7 Media Redirection Settings
- 3.7.8 Network Settings
- 3.7.9 PAM Order Settings
- 3.7.10 Platform Event Filters
- 3.7.11 NIC Management
- 3.7.12 Services
- 3.7.13 SMTP Settings
- 3.7.14 SSL Settings
- 3.7.15 System Firewall
- 3.7.16 User Management
- 3.7.17 Video Recording
- 3.7.18 IPMI Interfaces
- 3.7.19 Fan Control
- 3.7.20 PSU Cold Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
3-2
Chapter 3: Web-based User Interface
3.1 Web-based user interface
The web-based user interface allows you to easily monitor the remote server’s hardware
information including temperatures, fan rotations, voltages, and power. This application also
lets you instantly power on, power off, or reset the remote server.
To enter the Web-based user interface:
1. Enter the BIOS Setup during POST.
2. Go to the Server Mgmt Menu > BMC network configuration, then under Configure
IPv4 Support, find DMLAN1 and set Configuration Address source to [Static].
3. Enter the Station IP address, and Subnet mask.
4. Press <F10> to save your changes and exit the BIOS Setup.
3.1.1 Logging into the utility
1. Ensure that the LAN cable of the computer is connected to the LAN port of the remote
server.
2. Open the web browser and type in the same IP address as the one in the remote
server.
3. The below screen appears. There are two sets of user name and password you may
use to login. You may either use the username (admin) and password (admin), or use
the username (Administrator) and password (superuser). Click Sign me in after the
username and password is entered.
4. You will be prompted to change your password after logging in for the first time. Please
ensure that you change the password to a new password.
Make sure to change the password for both
admin
and
Administrator
for security
purposes.