User Manual
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Getting Started
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Captured BSOD
- 3.7.2 Date & Time
- 3.7.3 External User Services
- 3.7.4 KVM Mouse Setting
- 3.7.5 Log Settings
- 3.7.6 Manage Licenses
- 3.7.7 Media Redirection Settings
- 3.7.8 Network Settings
- 3.7.9 PAM Order Settings
- 3.7.10 Platform Event Filters
- 3.7.11 NIC Management
- 3.7.12 Services
- 3.7.13 SMTP Settings
- 3.7.14 SSL Settings
- 3.7.15 System Firewall
- 3.7.16 User Management
- 3.7.17 Video Recording
- 3.7.18 IPMI Interfaces
- 3.7.19 Fan Control
- 3.7.20 PSU Cold Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
2-8
Chapter 2: Getting Started
Configure IPV6 support
DM_LAN1 / Shared LAN
IPV6 support
Allows you to enable or disable IPV6 support.
Configuration options: [Enabled] [Disabled]
The following items appear only when IPV6 support is set to [Enabled].
Configuration Address source
Allows you to set the LAN channel parameters statically or dynamically (by
BIOS or by BMC). [Previous State] option will not modify any BMC network
parameters during BIOS phase.
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
The following items are available only when Configuration Address source is set to [Static].
Station IPV6 address
Allows you to set the station IPV6 address.
Prefix Length
Allows you to set the prefix length (maximum of Prefix Length is 128).
Configuration Router LAN1/2 Address
Allows you to set the LAN channel parameters statically or dynamically
(by BIOS or by BMC). Unspecified option will not modify any BMC network
parameters during BIOS phase.
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
The following items are available only when Configuration Router LAN1/2 Address is set to
[Static].
IPV6 Router1 IP Address
Allows you to set the IPV6 Router1 IP address.
IPV6 Router1 Prefix Length Lan1/2
Allows you to set the IPV6 router prefix length (maximum of IPV6 Router
Prefix Length is 128).
IPV6 Router1 Prefix Value Lan1/2
Allows you to change the IPV6 router prefix value.