User Manual

第五章：BIOS 程序設置
5-32
5.4.12 WHEA 設置
Enable or disable Windows
Hardware Error Architecture.
WHEA Support [Enabled]
WHEA Support [Enabled]
提供您啟用或關閉 Windows Hardware Error Architecture（WHEA）支
持。設置值有：[Disabled] [Enabled]
5.4.13 APM 設置
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Restrore AC Power Loss [Last State]
Power On By PCIE [Disabled]
Power On By RTC [Disabled]
Restore AC Power Loss [Last State]
若設置為 [Power Off]，則當系統在電源中斷之後電源將維持關閉狀態。
若設置為 [Power On]，當系統在電源中斷之後重新開啟。若設置為 [Last
State]，會將系統設置恢復到電源未中斷之前的狀態。設置值有：[Power
Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled] 關閉 PCIE 設備引起的喚醒事件。
[Enabled] 啟用 PCIE 設備引起的喚醒事件。
Power On By RTC [Disabled]
[Disabled] 關閉 RTC 引起的喚醒事件。
[Enabled]
當設置為 [Eanbled] 時，RTC Alarm Date (Days) 與 Hour/
Minute /Second 選項則可以讓用戶自行設置想要的數值。
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced