User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slot
- 2.5.1 Installing an expansion card to the riser card bracket
- 2.5.2 Installing an expansion card to the butterfly riser card bracket
- 2.5.3 Installing an ASUS PIKE II card
- 2.5.4 Installing an ASUS PCIE-NVME2-OCuLink card to the butterfly riser card bracket (optional for RS700A-E9-RS12V2 only)
- 2.5.5 Installing an ASUS PCIE-NVME4-OCuLink card to the riser card bracket (optional for RS700A-E9-RS12V2 only)
- 2.5.6 Configuring an expansion card
- 2.5.7 Installing Mezzanine cards
- 2.5.8 Installing M.2 (NGFF) cards
- 2.6 Cable connections
- 2.7 Backplane cabling
- 2.8 Storage device configuration and cabling (for RS700A-E9-RS12V2 only)
- 2.8.1 8 x SATA storage device configuration and cabling
- 2.8.2 12 x SATA storage device configuration and cabling
- 2.8.3 8 x SATA/SAS and 4 x SATA storage device configuration and cabling
- 2.8.4 2 x NVMe storage device configuration and cabling
- 2.8.5 4 x NVMe storage device configuration and cabling
- 2.8.6 8 x NVMe storage device configuration and cabling
- 2.9 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 Trusted Computing
- 5.5.2 PSP Firmware Versions
- 5.5.3 APM Configuration
- 5.5.4 Onboard LAN Configuration
- 5.5.5 Serial Port Console Redirection
- 5.5.6 CPU Configuration
- 5.5.7 PCI Subsystem Settings
- 5.5.8 USB Configuration
- 5.5.9 CSM Configuration
- 5.5.10 NVMe Configuration
- 5.5.11 SATA Configuration
- 5.5.12 Network Stack Configuration
- 5.5.13 AMD Mem Configuration Status
- 5.5.14 iSCSI Configuration
- 5.6 Chipset menu
- 5.7 Security menu
- 5.8 Boot menu
- 5.9 Tool menu
- 5.10 Save & Exit menu
- 5.11 AMD CBS menu
- 5.12 Event Logs menu
- 5.13 Server Mgmt menu
- Chapter 6: Driver Installation
- Appendix
5-41
ASUS RS700A-E9 Series V2
Pattern Select [PRBS]
Configuration options: [PRBS] [SS0] [Both]
Pattern Length [3]
This token helps to determine the pattern length. The possible options are
N=3...12.
Configuration options: [3] – [9]
Aggressor Channel [1 Aggressor Channel]
This helps read the aggressors channels. If set to [Enabled], you can
read from one or more than one aggressor channel. The default is set to
[Disabled].
Configuration options: [Disabled] [1 Aggressor Channel] [3 Aggressor
Channels] [7 Aggressor Channels]
Aggressor Static Lane Select Upper 32 bits [0]
Static Lane Select for Upper 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Aggressor Static Lane Select Lower 32 bits [0]
Static Lane Select for Lower 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Aggressor Static Lane Select ECC [0]
Static Lane Select for ECC Lanes. The bit mask represents the bits to be
read.
Configuration options: [0] – [9]
Aggressor Static Lane Value [0]
Configuration options: [0] – [9]
Target Static Lane Control [Disabled]
Configuration options: [Disabled] [Enabled]
The following items appear only when Target Static Lane Control is set to [Enabled].
Target Static Lane Select Upper 32 bits [0]
Static Lane Select for Upper 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Target Static Lane Select Lower 32 bits [0]
Static Lane Select for Lower 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Target Static Lane Select ECC [0]
Static Lane Select for ECC Lanes. The bit mask represents the bits to be
read.
Configuration options: [0] – [9]
Target Static Lane Value [0]
Configuration options: [0] – [9]
Data Eye Type [Worst Case Margin Only]
This option determines which results are expected to be captured for Data
Eye. Supported options are 1D Voltage Sweep, 1D Timing Sweep, 2D Full
Data Eye and Worst Case Margin only.
Configuration options: [1D Voltage Sweep] [1D Timing Sweep] [2D Full
Data Eye]