Manual

2-21ASUS RS520-E6/ERS8
Installing i Button (for PIKE 1078 only)
Follow the steps below to install an optional i Button on your motherboard.
1. Locate the I Button slot on the
motherboard.
2. Snap the I Button in place.
5. Connect the data cables, by
numerial order, to the SAS
connectors labeled SAS1-4 (red)
on the motherboard.
6. Set the SGPIO_SEL1 jumper on
the backplane to pin 2-3 when
connecting data cables to the SAS
connectors on the motherboard.