User's Manual

7-8 Chapter 7: Driver installation

Red Hat

Enterprise Linux OS 5.0

To install the RAID controller driver when installing Red Hat

Enterprise OS:

1. Boot the system from the Red Hat

OS installation CD.

2. At the

boot:, type linux dd.

3. Press <Enter>.

- To install or upgrade in graphical mode, press the <ENTER> key.

- To install or upgrade in text mode, type: linux text <ENTER>.

- Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

4. Select Yes using the <Tab> key when asked if you have the driver disk, then

press <Enter>.

Main Menu

Do you have a driver disk?

Yes No

5. Insert the Red Hat

Enterprise RAID driver disk to the USB oppy disk drive,

select OK, then press <Enter>.

The drivers for the RAID card are installed to the system.

Insert Driver Disk

Insert your driver disk into /dev/fd0

and press “OK” to continue.

Back