Owner's manual

Chapter 5: BIOS setup
5-24
The following items appear only if you enabled USB function.
ICH USB Control Sub-Menu
USB Function [Enabled]
USB 2.0 Controller [Enabled]
Legacy USB Support [Enabled]
ItemSpecicHelp
E n a b l e d U S B h o s t
controller.
F1
：
Help
↑↓
Select Item -
/+

Change Values F9
：
Setup Defaults
ESC
：
Exit
→←
Select Menu Enter

Select Sub-menu F10
：
Save and Exit
PhoenixBIOS SETUP UTILITY
Advanced
USB Function [Enabled]
Enable or disable the USB controller Configuration options [Disabled]
[Enabled]
5.4.4 ICH USB Control Sub-Menu
The items in this menu allow you to display the USB conguration settings.
Select an item then press <Enter> to display the conguration options.
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller. Setting this item
to [Enabled] allows the built-in high speed USB support in the BIOS to turn
on automatically when you install high speed USB devices. Configuration
options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Setting to [Enabled] allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. if no USB device is detected, the legacy USB support is
disabled. Conguration options: [Disabled] [Enabled]