Owner's manual

ASUS RS160-E4/RX4

4-5

2.USBdevicewake-up(3-pinUSBPW12)

Set these jumpers to +5V to wake up the computer from S1 sleep mode

(CPU stopped, DRAM refreshed, system running in low power mode) using

the connected USB devices. Set to +5VSB to wake up from S4 sleep mode

(no power to CPU, DRAM in slow refresh, power supply in reduced power

mode).

DSBF-DR12

DSBF-DR12 USB device wake up

USBPW1

(Default)

+5V +5VSB

3221

USBPW2

(Default)

+5V +5VSB

3221

・

The USB device wake-up feature requires a power supply that can

provide 500mA on the +5VSB lead for each USB port; otherwise,

the system would not power up.

・

If you are using Windows 2000, you need to install Service Pack 4

to wake up the system from S4 sleep mode.

・

The total current consumed must NOT exceed the power supply

capability (+5VSB) whether under normal condition or in sleep

mode.

3.Keyboardpower(3-pinKBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature.

Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you

press a key on the keyboard (the default is the Space Bar). This feature

requires an ATX power supply that can supply at least 1A on the +5VSB

lead, and a corresponding setting in the BIOS.

DSBF-DR12

DSBF-DR12 Keyboard power setting

KBPWR1

(Default)

+5V +5VSB