Manual

ASUS RS160-E5 4-13
8. USB connectors (10-1 pin USB34, USB56)
These connectors is for USB 2.0 ports. Connect the USB module cable to
the connectors, then install the module to a slot opening at the back of the
system chassis. The USB connectors comply with USB 2.0 specication that
supports up to 480 Mbps connection speed.
The USB port module is purchased separately.
®
DSAN-DX/RS160-E5
PIN 1
NC
GND
USB_P6+
USB_P6-
USB+5V
GND
USB_P5+
USB_P5-
USB+5V
USB56
PIN 1
NC
GND
USB_P4+
USB_P4-
USB+5V
GND
USB_P3+
USB_P3-
USB+5V
USB34
DSAN-DX/RS160-E5
USB 2.0 connectors
9. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2,
FRNT_FAN1/2/3/4)
The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.)
or a total of 3.15 A–6.66 A (53.28 W max.) at +12V. Connect the fan cables
to the fan connectors on the motherboard, making sure that the black wire of
each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufcient air
ow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
®
DSAN-DX/RS160-E5
FRNT_FAN1
PWM Control
FAN Speed
FAN Power
GND
CPU_FAN1
GND
FAN Power
FAN Speed
PWM Control
CPU_FAN2
GND FAN Power FAN Speed PWM Control
FRNT_FAN2
GND FAN Power FAN Speed PWM Control
REAR_FAN1
GND FAN Power FAN Speed PWM Control
FRNT_FAN3
GND FAN Power FAN Speed PWM Control
REAR_FAN2
PWM Control
FAN Speed
FAN Power
GND
FRNT_FAN4
GND FAN Power FAN Speed PWM Control
CPU_FAN1
REAR_FAN2
CPU_FAN2
FRNT_FAN2
FRNT_FAN3
FRNT_FAN4
FRNT_FAN1
REAR_FAN1
DSAN-DX/RS160-E5
FAN connectors