User’s Manual

華碩 RS160-E4/PA4 使用手冊
5-5
請勿在更新 BIOS 程式檔案時關閉或重新啟動系統！此舉將會導致系統
損毀！
4. 當完成更新時，畫面上會顯示 Flash memory has been successfully
programmed訊息，請按下任一鍵重新開機。
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Performing the following function
Load Image File BIOS.WPH
Verify interface information
Backup system BIOS ROM
 Checkashmemorytype(s)
Flash memory block:
Save block
Restore block
Zero out block
Erase block
Program block
Verify block
Flash programming complete
30% Read in
Identifyingashmemoryparttype 00:00:00 (18)
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Performing the following function
Load Image File BIOS.WPH
Verify interface information
Backup system BIOS ROM
 Checkashmemorytype(s)
Flash memory block:
Save block
Restore block ..........................
Zero out block ..........................
  Eraseblock√√√√√√√√√√√√√√√√√√√√√√√√√.
  Programblock.√√√√√√√√√√√√√√√√√√√√√√√√√√
  Verifyblock.√√√√√√√√√√√√√√√√√√√√√√√√√√
Flash programming complete
Phoenix Phlash16 Status
Flash memory has been successfully programmed
PRESS ANY KEY TO RESTART THE SYSTEM
If the system does not restart
TURN THE POWER OFF, THEN ON
Flash part: SST49LF008A DeviceID: 5a Mfr.ID: bf
Ready to restart the system 00:00:00 (1E)