User's Manual

2-13ASUS RS100-E7/PI2
4. Secure the hard disk drive with four
screws.
2.4.2 Installing a hard disk drive to the HDD tray 2
To install a hard disk drive to the HDD tray 2:
1. If you have an ODD installed,
remove the ODD rst before
installing a hard disk drive to the
HDD tray 2.
Disconnect the ODD cable, and then
use a screwdriver to remove the two
screws as shown.
2. Remove the four screws to release
the HDD bracket under the optical
disk drive.
HDD bracket