Første udgave November 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Alle rettigheder forbeholdes. Inden del af denne vejledning, herunder produkterne og softwaren, beskrevet heri, må genskabes, overføres, transskriberes, gemmes i et afhentningssystem eller oversættes til et andet sprog på nogen måde eller med nogen som helst midler, undtagen dokumentation, gemt af køberen for sikkerhedskopieringsformål, uden udtrykkelig skriftlig tilladelse fra ASUSTeK COMPUTER INC. (“ASUS”).
Indhold Bemærkninger............................................................................................. iv Oplysninger om sikkerhed........................................................................... v Vedligeholdelse og rengøring.................................................................... vi Takeback Services...................................................................................... vii Kapitel 1: Introduktion til produkt 1.1 Velkommen! . ............................
Bemærkninger Meddelelse fra USA's Føderale Kommunikationskommission (FCC) Denne enhed opfylder Kapitel 15 i FCC-reglerne. Betjening er underlagt følgende to betingelser: • Denne enhed må ikke udsende skadelig interferens, og • Denne enhed skal acceptere modtaget interferens, inklusiv interferens, der kan forårsage uønsket drift. Dette udstyr er testet og fundet at være i overensstemmelse med grænserne for klasse B digitale enheder, ifølge Kapitel 15 i FCC-reglerne.
Oplysninger om sikkerhed • Inden opsætning af skærmen skal du omhyggeligt læse al dokumentationen, der fulgte med pakken. • Du må aldrig udsætte skærmen for regn eller fugt for at undgå brand og fare for stød. • Forsøg aldrig at åbne skærmens kabinet. Der er farlig højspænding inden i skærmen, der kan resultere i alvorlig personskade. • Hvis strømforsyningen (adapteren) går i stykker må du ikke forsøge at reparere den selv. Kontakt en fagmand eller din forhandler.
Vedligeholdelse og rengøring • Det er en god ide at frakoble kabler og elledning inden du løfter eller flytter skærmen. Brug korrekt løfteteknik når du flytter skærmen. Når du løfter eller bærer skærmen skal du holde skærmen i dens kanter. Løft ikke skærmen med standeren eller elledningen. • Rengøring. Sluk for skærmen og frakobl elledningen. Rengør skærmens overflade med en fnugfri klud, der ikke ridser. Stædige pletter kan fjernes med en klud, fugtet med et mildt rengøringsmiddel.
Hvor kan du finde yderligere oplysninger Se følgende kilder for yderligere oplysninger, samt for opdateringer til produkt og software. 1. ASUS's websted ASUS's websteder over hele verden har oplysninger om ASUS hardware- og softwareprodukter. Se http://www.asus.com. 2. Ekstra dokumentation Din produktpakke indeholder muligvis ekstra dokumentation, der kan være tilføjet af forhandleren. Disse dokumenter er ikke en del af standard pakken.
viii
1.1 Velkommen! Mange tak for dit køb af ROG-spilskærmen! Den nyeste LCD-bredskærm fra ASUS har et bredere, lysere og mere krystalklart display, plus en lang række funktioner, der forbedrer din oplevelse. Nu kan du nyde den enkle og fremragende visuelle oplevelse, som skærmen leverer! 1.
1.3 Introduktion til skærm 1.3.1 Set forfra/fra siden 1 2 3 4 5 1. ( 5-vejs)-knap: • Aktiverer OSD-menuen. Bekræfter det valgte OSD-menuemne. • Hæver/sænker værdierne eller flytter det valgte emne op/ned/venstre/ højre. • Aktiverer OSD-menuen når skærmen skifter til standbytilstand eller viser meddelelsen “NO SIGNAL” (INTET SIGNAL). 2. -knap • Afslutter OSD-menuemnet. • Aktiverer OSD-menuen når skærmen skifter til standbytilstand eller viser meddelelsen “NO SIGNAL” (INTET SIGNAL). 3.
• Hvis du vil ændre genvejsfunktionen skal du gå til MyFavorite > Shortcut (Genvej) > Shortcut 2 (Genvej 2)-menu. • Aktiverer OSD-menuen når skærmen skifter til standbytilstand eller viser meddelelsen “NO SIGNAL” (INTET SIGNAL). 5. Tænd/sluk-knap-/strømindikator • Tænder og slukker for skærmen. • Strømindikatorens farvebetydning kan findes i tabellen nedenfor. 1.3.2 Status Beskrivelse Hvid Ravgul SLUKKET TÆNDT Standbytilstand/intet signal SLUKKET Set bagfra 10 1. Hul til Kensington-lås. 2.
1.3.3 GamePlus-funktion Funktionen GamePlus indeholder et værktøjssæt, og den opretter et bedre spilmiljø for brugere, der spiller forskellige typer spil. Krydsmarkøroverlejringen med 6 forskellige valgmuligheder for krydsmarkør giver dig mulighed for at vælge en, der er bedst egnet til det spil, du spiller. Der er også en timer på skærme, de kan placere i venstre side af skærmen, således at du kan holde øje med den forløbne spilletid, mens FPS (billeder pr.
1.3.4 GameVisual-funktion GameVisual-funktionen hjælper dig med at vælge mellem forskellige billedtilstande hurtigt og nemt. Sådan aktiveres GameVisual: 1. Tryk på genvejsknappen for GameVisual. 2. Flyt knappen 3. Tryk på knappen 4. Afslut menuen ved at flytte knappen ( ) op/ned for at fremhæve en ønsket indstilling. ( ) eller flyt knappen til højre for at aktivere den. ( ) til venstre.
1.3.5 • Andre funktioner HDR Skærmen understøtter HDR-format. Når der detekteres HDR-indhold, vises meddelelsen "HDR ON" (HDR TIL). Ved visning af HDR-indhold er den/de følgende funktion(er) ikke tilgængelige. ELMB Sync, Sniper (Skarpskytte), GameVisual, Shadow Boost, Brightness (Lysstyrke), Contrast (Kontrast), ASCR, Aspect Control (Aspekt kontrol), Blue Light Filter (Blåt lys-filter), Color Temp.
2.1 Samling af skærmens arm/fod 1. Sæt foden ind i armen. 2 Fastgør foden til armen ved at spænde den medfølgende møtrik. Vi anbefaler, at du dækker bordets overflade med et blødt klæde for at undgå at beskadige skærmen. Bundskruestørrelse: M6 x 15 mm. 2.2 Kabelstyring Du kan organisere kablerne ved hjælp af input/output-portens dæksel. • Arrangering af kablerne • Sådan bruges input/output-portens dæksel: Dette dæksel kan påsættes eller fjernes.
2.3 Justering af skærmen • For at opnå en optimal visning anbefaler vi, at du ser direkte på skærmen og derefter justerer skærmen til den vinkel, der er mest komfortabel for dig. • Hold fast i standeren, så den ikke falder mens du justerer dens vinkel. • Den anbefalede justerede vinkel er +20˚ til -5˚ (når du vipper skærmen)/+25˚ til -25˚ (når du drejer skærmen)/+100 mm (når du justerer højden)/90˚ (til portrætvisning).
2.4 Sådan aftages armen (ved VESA vægmontering) Den aftagelige arm på denne skærm er specielt designet til VESA vægmontering. Sådan aftages armen: 1. Læg skærmen ned med skærmsiden vendt nedad på et bord. 2. Fjern dækslerne, der hvor skærmen og armen mødes. 3. Løsn de fire skruer bag på skærmen og fjern armen/foden. 1 2 3 4 Vi anbefaler, at du dækker bordets overflade med et blødt klæde for at undgå at beskadige skærmen. • VESA vægmonteringssættet (100 x 100 mm) skal købes særskilt.
2.5 Tilslutning af kablerne Tilslut kablerne som i de følgende instruktioner: Kun for service • • Sådan tilsluttes elledningen: a. Tilslut strømadapteren på sikker vis til skærmens DC-stik. b. Tilslut den ene ende af elledningen til strømadapteren og den anden ende til en stikkontakt. Sådan tilsluttes DisplayPort/HDMI-kablet: a. Tilslut den ene ende af DisplayPort/HDMI-kablet til skærmens DisplayPort/HDMI-stik. b.
3.1 OSD (On-Screen Display)-menu 3.1.1 Konfiguration DisplayPort 2560x1440@ 60Hz Racing Mode Aura OFF ROG Strix XG27AQ HDR OFF Gaming Overclocking Image OD Color Adaptive-Sync (DP) Input Select ELMB SYNC Lighting Effect GamePlus MyFavorite GameVisual System Setup Shadow Boost BACK MOVE/ENTER 1. Tryk på knappen 2. Flyt knappen ( ) op/ned for at navigere gennem funktionerne. Fremhæv den ønskede funktion og tryk på knappen ( ) for at aktivere den.
• Max Refresh Rate (Maks. opdateringshastighed): Giver dig mulighed for at vælge en opdateringshastighed på 170 Hz (kun med input via DisplayPort). Tryk to gange på knappen aktivere indstillingen. • ( ) efter valget for at • Overclocking kan forårsage flimmer på skærmen. Du kan reducere denne effekt ved at frakoble DisplayPort-kablet og bruges skærmens OSD-mene til at prøve igen med en mere sikker Maks. opdateringshastighed. • Denne funktion er kun tilgængelig når DisplayPort Ver. er DisplayPort 1.
2. Image (Billede) DisplayPort 2560x1440@ 60Hz Racing Mode Aura OFF ROG Strix XG27AQ HDR OFF Gaming Brightness Image Contrast Color HDR Input Select Dynamic Dimming Lighting Effect ASCR MyFavorite Aspect Control System Setup Blue Light Filter MOVE/ENTER 100 80 BACK EXIT • Brightness (Lysstyrke): Justeringsområdet er fra 0 til 100. • Contrast (Kontrast): Justeringsområdet er fra 0 til 100. • HDR: Indeholder to HDR-tilstande.
3. • Du bør hvile øjnene regelmæssigt ved at fokusere på genstande, der er langt væk, for at reducere anstrengelse og tørhed af øjnene. • Øjenøvelser kan hjælpe med at reducere anstrengelse af øjnene. Gentag disse øvelser ofte. Hvis anstrengelse af øjnene fortsætter skal du rådføre dig med en læge. Øjenøvelser: (1) Gentag flere gange: Se op og ned (2) Rul langsomt med øjnene (3) Bevæg øjnene til siden.
5. Lighting Effect (Belysningseffekt) DisplayPort 2560x1440@ 60Hz Racing Mode Aura OFF ROG Strix XG27AQ HDR OFF Gaming Aura Sync Image Aura RGB Color Input Select Lighting Effect MyFavorite System Setup BACK MOVE/ENTER EXIT • Aura Sync: Giver dig mulighed for at slå funktionen Aura Sync - der synkroniserer Aura RGB-lysfunktionen mellem de understøttede enheder - til eller fra.
7. System Setup (Opsætning af system) DisplayPort 2560x1440@ 60Hz Racing Mode Aura OFF ROG Strix XG27AQ HDR OFF Gaming Language Image Sound Color USB Hub Input Select Power Indicator Lighting Effect Power Key Lock MyFavorite Key Lock System Setup OSD Setup DisplayPort Ver.
3.2 Aura Armoury Crate er et softwareprogram, der styrer de farvede LED’er på understøttede enheder som f.eks. skærme, bundkort, grafikkort, desktop-PC’er osv. Aura giver dig mulighed for at justere farven på RGB LED’er på disse enheder og vælge forskellige lyseffekter. Du kan også korrigere eller justere farven på LED’er ved at kalibrere dem. Sådan aktiveres Aura: 1. Indstil funktionen Aura Sync til ON (TIL) i OSD-menuen. 2. Tilslut USB 3.0 upstream-porten på skærmen til computerens USB-port. 3.
3.3 Oversigt over specifikationer Paneltype Panelstørrelse Maks. opløsning Pixelstørrelse Lysstyrke (typ.) Kontrastforhold (typ.) Visningsvinkel (V/L) CR > 10 Skærmfarver Responstid Valg af farvetemperatur Analogt input Digitalt input Øretelefonstik Lyd-input Højttaler (indbygget) USB 3.
Tilbehør Overensstemmelse og standarder Hurtig start-guide, garantikort, strømadapter, elledning, DP-kabel, HDMI-kabel, USB-kabel, testrapport om farvekalibrering, input/outputportdæksel, ROG-mærkat CB, CE, CU, CCC, cTUVus, MEPS, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL, Windows 7 WHQL, Windows 10 WHQL, KCC, E-Standby, TUV-Flicker Free, TUV-Low Blue Light, UkrSEPRO, ICES-3, CEC *Specifikationer er underlagt ændringer uden varsel.
ASUS XG27AQ Outline Dimension *Unit: mm(inch) 20.0 5.0 Swivel: 298,4 [11.7] 25 Degree 611,2 [24.1] 596,7 [23.5]-Active area 25.00 AA Center 560,5 [22.1] 507,5 [20.0] 366,5 [14.4] 255,0 [10.0] Pivot: 90 Degree(clockwise) 90 .0 134,3 [5.3] 335,7 [13.2]-Active area 35,1 [1.4] 85,4 [3.4] 117,0 [4.6] 100,0 [3.9] 84,0 [3.3] 117,0 [4.6] 100,0 [3.9] M4*4 Depth 10 Wall mount Keep out area Kapitel 3: Generelle instruktioner 3-10 Udvendige mål 3.4 174,7 [6.9] 25.00 22,6 [0.9] 163,6 [6.
3.5 Fejlfinding (ofte stillede spørgsmål) Problem Mulig løsning Strøm-LED er ikke TÆNDT • Tryk på knappen for at kontrollere, om skærmen i TÆNDT. • Kontroller, om elledningen er tilsluttet korrekt til skærmen og stikkontakten. Strøm-LED lyser hvidt og der er intet • Kontroller, om skærmen og computeren er skærmbillede TÆNDT. • Kontroller, at signalkablet er tilsluttet korrekt til skærmen og computeren. • Efterse signalkablet og kontroller, at ingen af benene i stikket er bøjede.
3.
Video-timing Opløsning og frekvens HDMI DP 720x480P Opdateringshastighed 59,94Hz Opdateringshastighed Ikke understøttet 720x480P 60Hz Ikke understøttet 1280x720P 59,94Hz 59,94Hz 1280x720P 60Hz 60Hz 1440x480P Ikke understøttet 59,94Hz 1440x480P 60Hz 60Hz 1920x1080P 59,94Hz 59,94Hz 1920x1080P 60Hz 60Hz 1920x1080P 120Hz 120Hz ROG Strix XG27AQ-seriens LCD-spilskærm 3-13
3-14 Kapitel 3: Generelle instruktioner