Primera edición Abril de 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Todos los derechos reservados. Ninguna parte de este manual, incluyendo los productos y el software descritos en éste, podrá ser reproducida, transmitida, transcrita, almacenada en un sistema de recuperación o traducida a cualquier idioma de cualquier forma o modo, a excepción de la documentación conservada por el comprador por propósitos de copia de seguridad, sin el permiso explícito por escrito de ASUSTeK COMPUTER INC. (“ASUS”).
Contenido Avisos .......................................................................................................... iv Información de seguridad............................................................................ v Limpieza y mantenimiento.......................................................................... vi Takeback Services...................................................................................... vii Información de producto para EU Energy Label............................
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. El funcionamiento está sujeto a las dos condiciones siguientes: • Este dispositivo no puede causar interferencias perjudiciales, y • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Información de seguridad • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. • Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. • No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales.
• Si tiene problemas técnicos con el monitor, póngase en contacto con un profesional cualificado o con su distribuidor. • Ajustar el control de volumen o el ecualizador en una configuración distinta de la posición central puede aumentar la tensión de salida de los audífonos/ auriculares y, por lo tanto, el nivel de presión de sonido. • El adaptador sólo se utiliza con este monitor, no lo utilice con otros fines.
Convenciones utilizadas en esta guía ADVERTENCIA: información para evitar daños personales al intentar completar una tarea. PRECAUCIÓN: información para evitar daños en los componentes al intentar completar una tarea. IMPORTANTE: información que DEBE seguir para completar una tarea. NOTA: sugerencias e información adicional que ayudan a completar una tarea. Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1.
viii
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor para juegos ROG! El último monitor LCD de pantalla ancha de ASUS proporciona una imagen más amplia, brillante y clara además de incluir funciones que mejoran su experiencia visual. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Presentación del monitor 1.3.1 Vista frontal/lateral 1 2 3 4 5 1. Botón ( 5 direcciones): • Activa el menú OSD. Activa el elemento seleccionado en el menú OSD. • Aumenta/disminuye los valores o mueve su selección arriba/ abajo/ izquierda/derecha. • Activa el menú OSD cuando el monitor se posiciona en modo en espera o muestra el mensaje “SIN SEÑAL”. 2. Botón • Sale del elemento del menú OSD. • Activa el menú OSD cuando el monitor se posiciona en modo en espera o muestra el mensaje “SIN SEÑAL”.
• Activa el menú OSD cuando el monitor se posiciona en modo en espera o muestra el mensaje “SIN SEÑAL”. 5. Botón de encendido/Indicador de encendido • Permite encender o apagar el monitor. • En la tabla siguiente encontrará la definición del color del indicador de alimentación. 1.3.2 Estado Descripción Blanco Ámbar APAGADO ENCENDIDO Modo de espera/No hay señal APAGADO Vista posterior 10 1 2 3 4 5 6 7 8 9 1. Puerto DC-IN. Este puerto permite conectar el cable de alimentación. 2.
1.3.3 Función GamePlus La función GamePlus ofrece un kit de herramientas y crea un ambiente de juego óptimo para los usuarios en los diferentes juegos. La superposición de mirilla con 6 diferentes opciones de mirilla permite elegir la que mejor se adapte al juego. Existe también un temporizador en pantalla que se puede colocar a la izquierda de la pantalla para controlar el tiempo de juego transcurrido; el contador de FPS (fotogramas por segundo) permite saber si el juego se está ejecutando correctamente.
1.3.4 Función GameVisual La función GameVisual ayuda a elegir entre diversos modos de imagen de manera cómoda. Para activar GameVisual: 1. Pulse el botón de acceso directo a GameVisual. 2. Mueva el botón ( ) arriba/abajo para resaltar la opción que desee. 3. Pulse el botón ( ) o mueva el botón a la derecha para activarla. 4. Para salir del menú, mueva el botón ( ) a la izquierda.
1.3.5 Otra(s) función(es) HDR El monitor admite el formato HDR. Cuando se detecte contenido HDR, se mostrará el mensaje emergente "HDR EN". Cuando se muestre contenido HDR, las siguientes funciones no estarán disponibles: ELMB Sync, GameVisual, Shadow Boost, Brillo, Contraste, ASCR, Controle de Aspecto, Filtro de luz azul, Temp del color, Gamma, Saturación, Atenuación dinámica (ajustada en ENCENDER).
2.1 Ensamblar el brazo y la base del monitor 1. Inserte la base en el brazo. 2 Fije la base al brazo apretando el tornillo incluido. Recomendamos que coloque un paño suave sobre la mesa donde apoyará el monitor con el fin de no dañar el monitor. Tamaño del tornillo de la base: M6 x 15 mm. 2.2 Gestión del cableado Puede organizar los cables con ayuda de la tapa del puerto de entrada/salida.
2.3 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • El ángulo de ajuste recomendado es de +20˚ a -5˚ (para inclinación)/de +25˚ a -25˚ (para balanceo)/+100 mm (para ajuste de la altura)/90˚ (para vista vertical).
2.4 Extraer el brazo (para montaje de pared VESA) El brazo extraíble de este monitor está especialmente diseñado para un montaje de pared VESA. Para extraer el brazo: 1. Coloque la parte frontal del monitor boca abajo en una mesa. 2. Quite las cubiertas sobre las que se une el monitor al brazo. 3. Afloje los cuatro tornillos de la parte posterior del monitor y quite el brazo/la base.
2.5 Conectar los cables Conecte los cables siguiendo estas instrucciones: • • Para conectar el cable de alimentación: a. Conecte el adaptador de corriente de forma segura a la entrada de CC del monitor. b. Conecte un extremo del cable de alimentación al adaptador de corriente, y el otro extremo a una toma de corriente eléctrica. Para conectar el cable DisplayPort/HDMI: a. Enchufe un extremo del cable DisplayPort/HDMI en el puerto de entrada DisplayPort/HDMI del monitor. b.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo reconfigurar DisplayPort-1 2560x1440@ 270Hz Modo Carrera Aura OFF ROG Strix XG27AQM HDR Off Juegos Overclocking Imagen OD Color Adaptive-Sync (DP) Selección de entrada ELMB SYNC Efecto de iluminación GamePlus MyFavorite GameVisual Config. Sistema Shadow Boost BACK MOVE/ENTER 1. Pulse el botón 2. Mueva el botón ( ) arriba/abajo para desplazarse por las funciones. Resalte la función que desee y pulse el botón ( ) para activarla.
• • El overclocking puede causar parpadeo en la pantalla. Para reducir estos efectos, desconecte el cable DisplayPort y use el menú OSD del monitor para intentarlo de nuevo con una frecuencia máxima de actualización más segura. • Esta función solo está disponible cuando la Versión de DisplayPort sea DisplayPort 1.2+HDR. OD: mejora el tiempo de respuesta del nivel de gris del panel LCD. Esta función no está disponible cuando ELMB SYNC está habilitado.
2. Imagen DisplayPort-1 2560x1440@ 270Hz Modo Carrera Aura OFF ROG Strix XG27AQM HDR Off Juegos Brillo 50 Imagen Contraste 80 Color HDR Selección de entrada Atenuación dinámica Efecto de iluminación ASCR MyFavorite Controle de Aspecto Config. Sistema Filtro de luz azul MOVE/ENTER BACK • Brillo: el rango de ajuste va de 0 a 100. • Contraste: el rango de ajuste va de 0 a 100. • HDR: Contiene dos modos HDR.
3. • Para minimizar la tensión ocular y la sequedad de los ojos, debe descansar la vista de forma periódica dirigiendo la mirada a objetos que estén lejos. • Realizar ejercicios con los ojos puede ayudar a reducir la tensión ocular. Repita estos ejercicios con frecuencia. Si la tensión ocular continúa, consulte a un médico. Ejercicios oculares: (1) Mire arriba y abajo repetidamente. (2) Gire los ojos lentamente. (3) Mueva los ojos en diagonal.
5. Efecto de iluminación DisplayPort-1 2560x1440@ 270Hz Modo Carrera Aura OFF ROG Strix XG27AQM HDR Off Juegos Aura Sync Imagen Aura RGB Color Selección de entrada Efecto de iluminación MyFavorite Config. Sistema BACK MOVE/ENTER EXIT • Aura Sync: Le permite activar o desactivar la función Aura Sync que sincroniza el efecto de luz Aura RGB entre todos los dispositivos compatibles.
7. Config. Sistema DisplayPort-1 2560x1440@ 270Hz Modo Carrera Aura OFF ROG Strix XG27AQM HDR Off Juegos Idioma Imagen Sonido Color USB Hub Selección de entrada Indicador de encendido Efecto de iluminación Bloq. botón encendido MyFavorite Bloqueo de teclas Config. Sistema Config.
3.2 Aura Armoury Crate es un programa de software que controla los LED de color en los dispositivos compatibles, como monitores, placas base, tarjetas gráficas, ordenadores de escritorio, etc. Aura le permite ajustar el color de los LED RGB en estos dispositivos y seleccionar diferentes efectos de luz. También puede corregir o ajustar el color de los LED calibrándolos. Para activar Aura: 1. Seleccione ENCENDER para activar la función Aura Sync en el menú OSD. 2. Conecte el puerto de envío USB 3.
3.3 Resumen de especificaciones Tipo de panel Tamaño del panel Resolución máxima Densidad de píxeles Brillo (típ.) Relación de contraste (típ.) Ángulo de visión (H/V) CR>10 Colores de visualización Tiempo de respuesta Selección de temperatura de color Entrada analógica Entrada digital Toma de auricular Entrada de audio Altavoz (integrado) Puerto USB 3.
Accesorios Cumplimiento y normas Guía de inicio rápido, tarjeta de garantía, adaptador de corriente, cable de alimentación, cable DP, cable HDMI (opcional), cable USB, Informe de prueba de la calibración del color, cubierta de puerto de entrada/salida, Pegatina ROG CB, CE, CU, CCC, cTUVus, MEPS, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL, Windows 7 WHQL, Windows 10 WHQL, KCC, E-Standby, TUV-Flicker Free, TUV-Low Blue Light, UkrSEPRO, ICES-3, CEC, PC Recycle, PSB *Las especificaciones están s
3.4 Dimensiones del contorno ASUS XG27AQM Outline Dimension *Unit: mm(inch) Pivot: +90 Degree 90 20 5 133.98 [5.3] 175.43 [6.9] 8.48 [0.3] 167.83 [6.6] 306.86 [12.1] 613.7 [24.2] 596.74 [23.5] 560.48 [22.1] 7.95 [0.3] 22.63 [0.9] 335.66 [13.2] 367.21 [14.5] 140.02 [5.5] 254.96 [10.0] 25 507.22 [20.0] 88.72 [3.5] 31.71 [1.2] 22.26 [0.9] Swivel: +/-25 Degree 231.44 [9.1] 100 [3.9] 396.52 [15.6] 140.02 [5.5] 25 84.01 [3.3] 117 [4.6] 100 [3.
3.5 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación no se • Pulse el botón para comprobar si el ENCIENDE monitor está en modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. El LED de alimentación se ilumina en • Compruebe si el monitor y el equipo se blanco pero no se muestra ninguna encuentran en el modo ENCENDIDO.
3.
Tiempo de vídeo Frecuencia de resolución 720x480P 720x480P 1280x720P 1280x720P 1440x480P 1440x480P 1920x1080P HDMI DP Frecuencia de actualización Frecuencia de actualización 59,94Hz No compatible 60Hz 59,94Hz No compatible 60Hz No compatible 60Hz 59,94Hz 60Hz 59,94Hz 60Hz 59,94Hz 59,94Hz 1920x1080P 60Hz 60Hz 1920x1080P 120Hz 120Hz Monitor LCD para juegos de la serie ROG Strix XG27AQM 3-13
3-14 Capítulo 3: Instrucciones generales