User's Manual
Table Of Contents
- 1.1 Knowing BIOS
- 1.2 BIOS setup program
- 1.3 My Favorites
- 1.4 Main menu
- 1.5 Ai Tweaker menu
- 1.6 Advanced menu
- 1.6.1 Platform Misc Configuration
- 1.6.2 CPU Configuration
- 1.6.3 System Agent (SA) Configuration
- 1.6.4 PCH Configuration
- 1.6.5 PCH Storage Configuration
- 1.6.6 PCH-FW Configuration
- 1.6.7 Onboard Devices Configuration
- 1.6.8 APM Configuration
- 1.6.9 USB Configuration
- 1.6.10 Network Stack Configuration
- 1.6.11 HDD/SSD SMART Information
- 1.6.12 Intel(R) Rapid Storage Technology
- 1.6.13 Intel(R) Ethernet Connection (7) I219-V - 00:0C:6E:00:00:42
- 1.7 Monitor menu
- 1.8 Boot menu
- 1.9 Tool menu
- 1.10 Exit menu
- 1.11 Updating BIOS
28
ROG STRIX H370-F GAMING BIOS Manual
MCH Full Check
Enable this item to enhance the stability of your system. Disable this item to enhance
the DRAM overclocking capability.
Conguration options: [Auto] [Enabled] [Disabled]
Training Profile
This item allows you to select a DIMM Training Prole.
Conguration options: [Auto] [Standard Prole] [User Prole]
DLLBwEn
Conguration options: [Auto] [1] - [7]
SPD Write Disable
This item allows you to enable or disable SPD write disable. For security
recommendations, SPD write disable bit must be set.
Conguration options: [TRUE] [FALSE]
DIGI+ VRM
CPU Load-line Calibration
Load-line is dened by Intel
®
specication and affects CPU power voltage. The CPU
working voltage decreases proportionally to CPU loading. Higher load-line calibration
could get higher voltage and good overclocking performance, but increases the CPU
and VRM thermal conditions. Select from levels 1 to 7 to adjust the load-line slope.
Conguration options [Auto] [Default] [Level 1] - [Level 7]
The actual performance boost may vary depending on your CPU specication.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability
This item allows you to set the shut off current limit for external voltage regulator. A
higher setting will allow the voltage regulator to supply more current while a lower
setting will cause the voltage regulator to shut off the system when the supplied current
is higher than the set value.
Conguration options: [Auto] [100%] [140%]
Congure higher values when overclocking or under a high CPU loading for extra power
support.