User Guide

80 Chapter 5: BIOS setup
UMA Frame Buffer Size [64MB]
This option allows you to select the size of the onboard graphics controller
memory use. Configuration options: [8MB] [16MB] [32MB] [64MB] [128MB]
[Auto]
Video Display Device [Auto]
This parameter allows you to select the type of video display device you
intend to use. Configuration options: [Auto] [CRT Only] [DFP Only]
[TV Only] [CRT and DFP]
TV Standard [NTSC]
Select the TV standard according to your location.
Configuration options: [NTSC] [PAL] [PAL-M] [PAL-60] [NTSC-JAP]
[PAL-CN] [PAL-N] [SCART_RGB]
AC97 Audio Device [Auto]
USB 1.1 OHCI Controllers [Enabled]
USB 2.0 EHCI Controller [Enabled]
Legacy USB Support [Auto]
SouthBridge Configuration
AC97 Audio Device [Auto]
Setting to [Auto] allows the BIOS to detect the onboard audio device. The
onboard audio controller is enabled when an audio device is detected.
Configuration options: [Auto] [Disabled]
USB 1.1 OHCI Controllers [Enabled]
This option allows you to enable or disable the USB 1.1 OHCI controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 EHCI Controller [Enabled]
This option allows you to enable or disable the USB 2.0 EHCI controller.
Configuration options: [Enabled] [Disabled]