User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1.2 OSD function introduction
- Chapter 3: General instructions
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-5ASUS PA329CRV Series LCD Monitor
3. Image
Set the image related setting from this menu.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
QuickFit Plus
PIP/PBP
Preset
Palette
Blue Light Filter
Image
Sharpness
Trace Free
Aspect Control
Input Range
0
0
60
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
To activate this function, you need to do the following: turn off PIP/PBP and
disable HDR on your device.
• Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot or 1:1
Ratio.
To activate this function, you need to do the following: turn off
MediaSync
and
PBP
.
• Input Range: To map signal range with whole black to white presented
range of display.
• Blue Light Filter: Adjust the strength of blue light filter.
To activate this function, you need to do the following: disable HDR on your
device.