User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1.2 OSD function introduction
- Chapter 3: General instructions
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
1.3.2 Back view
15W
15W
10 11
96W
96W
1 2 3 4 5 6 7 8 9
10
1. Kensington lock slot
.
2. Power switch
: Press the switch to turn on/off power.
3. AC-IN port
: This port connects the power cord.
4. HDMI-1 port
: This port is for connection with an HDMI compatible
device.
5. HDMI-2 port
: This port is for connection with an HDMI compatible
device.
6. DisplayPort in
: This port is for connection with a DisplayPort compatible
device.
7. Daisy-Chain DisplayPort output
: This port allows you to connect
multiple DisplayPort compatible monitors.
8. USB 3.2 Gen 1 Type-C
: This port is for connection with a USB upstream
cable. The connection supports USB power and data delivery.
This monitor is Super-Speed USB 3.2 Gen 1 compatible(5Gbps). The port
offer 96W power delivery with output voltage of 5V/3A, 9V/3A, 12V/3A 15V/3A,
20V/4.8A.
9. Earphone jack: This port is only available when an HDMI/DisplayPort/USB
Type-C cable is connected.
10. USB 3.2 Gen 1 Type-A: These ports are for connection with USB devices,
such as USB keyboard/mouse, USB flash drive, etc.
11. USB 3.2 Gen 1 Type-C: This port is for connection with USB devices, such
as USB keyboard/mouse, USB flash drive, etc.